Pressure Sensors
Showing all 11 results
-
Sensata 112CP5 Combined Pressure & Temperature Sensor
The Sensata 112CP5 combines pressure and temperature sensing in one housing, enabling accurate superheat detection for HVAC/R with ±0.8% F.S. pressure accuracy and 10KΩ/100Ω thermistor options. $5,000.00 -
Sensata 116CP Gas Boiler Water Pressure Sensor 0-6 Bar
The Sensata 116CP is purpose-built for gas wall-hung boilers and water heaters: a proven high-volume design with 100% automatic calibration, 0-3 to 0-6 bar ranges and 0.5-4.5Vdc output. $5,000.00 -
Sensata 2CP5 / 2CP50 Combined Pressure & Temperature Sensor 0-650 psi
The Sensata 2CP5/2CP50 measures pressure and temperature at a single installation point, enabling fast fluid-internal temperature sensing and accurate superheat control for HVAC/R systems. $5,000.00 -
Sensata 2HMP IP67 HVAC / Refrigeration Pressure Sensor 100-750 psi
The Sensata 2HMP targets HVAC, refrigeration and industrial applications with a sealed IP67 cable design, 304L stainless steel / brass housing, 0-100 to 0-750 psi ranges and 0.5-4.5VDC ratiometric output. $5,000.00 -
Sensata 35CP Industrial Pressure Sensor 0-10 to 0-50 Bar
The Sensata 35CP is a compact industrial pressure sensor for general-purpose applications, offering 4-20mA or 0.5-4.5V ratiometric output, pressure ranges from 0-10 to 0-50 bar and ±0.5% / ±1% F.S. accuracy in a stainless steel or brass housing. $5,000.00 -
Sensata 35CPx2 Inverter HVAC Pressure Sensor (R410a Compatible)
The Sensata 35CPx2 is designed for inverter air conditioners and refrigeration systems, featuring a compact housing, superior EMC immunity with 1800VAC terminal-to-case isolation and over 2 million full-range pressure cycles. $5,000.00 -
Sensata 35IP Sealed High-Pressure Sensor up to 500 Bar
The Sensata 35IP uses silicone-oil sealed technology in a fully sealed stainless steel housing, monitoring pressures up to 500 bar with ±0.25%-0.5% F.S. accuracy and M12 / DIN 43650 connector options. $5,000.00 -
Sensata 36CP Low-Cost Industrial Pressure Sensor 0-50 Bar
The Sensata 36CP is the most cost-effective industrial pressure sensor in the Sensata line, built on a proven high-volume design with 0.5-4.5VDC ratiometric output and an Al6061-T6 aluminum housing. $5,000.00 -
Sensata 70CP Industrial OEM Pressure Sensor 15-750 psi
The Sensata 70CP series targets industrial OEM applications with 6-30VDC wide supply, 4-20mA or voltage outputs, and three port material options: stainless steel (71CP), plated steel (73CP) and brass (77CP). $5,000.00 -
Sensata P1J / P1K MEMS Differential Pressure Sensor (I2C / Analog)
The Sensata P1J/P1K MEMS low-pressure differential sensors measure down to inches-of-water, with digital (P1J: I2C/SPI) or analog (P1K: 0.5-4.5Vdc) output and compact PCB-mount packaging. $5,000.00 -
Sensata PTE7000 High-Pressure Transducer 200 / 250 / 400 Bar
The Sensata PTE7000 is a high-accuracy fully sealed pressure transducer for 0-200 / 250 / 400 bar (up to 6000 psi), stainless steel housing, 4-20mA / 0-5V / 0-10V outputs, widely used in semiconductor and injection-molding equipment. $5,000.00
